ACRAWAX?C

N,N’ Ethylene Bisstearamide

Physical Properties                  FORM

物理性質                             形式

                         Beaded  Prilled  Powdered   Atomized

                          珠狀     粒狀    粉狀        霧狀

Acid Value..............  8 Max.   7 Max.   6Max.     6 Max.

(酸值)

Color,Gardner...........  5 Max.   4 Max.   3Max.     5 Max.

(顏色，Gardner)

Melting point，°C......  140-145   140-145 140-145   140-145

(熔點，°C)

Neutralization Value.....  2.0      2.0      2.0      2.0

(中和值)

ACRAWAX C is also available in a 33% aqueous dispersion.

ACRAWAX C 也可提供含量為33%的懸浮液。

Specifications and analytical methods are available uponrequest.

需要時可以提供說明及分析方法。

Screen Test %

粒度分布

On 10 mesh, %............  10 Max. ---- ---- ----

On 40 mesh, %.....................  2 Max. ---- ----

On 100 mesh%.............  90 Min. ----     1 Max. ----

On 325 mesh,%.....................  98 Min. ----       1 Max.

(325 目，%)

Typical Properties

典型性質

Flash Point, °C.........   285    285      285        285

(閃點，°C)

90% of Particles(microns) ...................<140       <13

(90%的微粒，微米)

Mean Particles Size(microns) .570   130       40         6

(平均粒子大小，微米)

Page 2 of 2

High decomposition point--300-360℃, enables its use in a wild range oftemperature without degradation. Unique

producing tech--spray drying, makes the particles spherical andconsistent, thus blends with polymers perform more

uniform than usual additives, shortening of blending-time, andimprovement of productive efficiency. Impart an

excellent balance of in- and ex- lubricity, improve processingand final products properties.

分解溫度300-360℃,使它可應用于一個廣泛的溫度范圍內,而不用擔心降解. 獨特的生產工藝—噴

霧干燥,生產出來的顆粒呈球狀且均一, 與聚合物的混合較一般的添加劑均勻; 同時可縮短混合時

間, 提高生產效率. 作為一個保持內外潤滑平衡的塑料添加劑, 它可以明顯改善加工性能及制品

的品質.

Suggested Applications

應用范圍

ACRAWAX C is an effective lubricant, processing aid, slipadditive for most polymers including ABS, acetal, PVC,

polypropylene, nylon, polyethylene and thermoplastic polyester.At the same time, help certain ingredients, such as

pigments and fillers, disperse more evenly, save costs andavoid the effects on physical properties The typical loading

is 0.1-3.0%.

作為一個有效的潤滑劑、加工助劑、爽滑劑， ACRAWAX C 適用于大多數的聚合物，包括ABS、POM、

PVC、PP、PA、PE 和熱塑性聚酯;同時它可促使顏料、充填劑等在基質中的分散更均勻，節約成本

的同時避免物性受損; 建議添加量0.1-3.0%。

ACRAWAX C Powdered or Atomized is traditionally used as alubricant and binder for cold compaction of powdered

metal parts.

粉狀或霧狀的ACRAWAX C 通常用于粉末金屬零件冷壓過程的潤滑劑與粘合劑。

Packaging

包裝 Beaded Prilled Powdered Atomized

珠狀 粒狀粉狀 霧狀

50#Bag 50#Bag 50#Bag ----

(50 磅/包) (50 磅/包) (50 磅/包) ----

250#Drum 225#Drum 150#Box 100#Box

(250 磅/桶) (225 磅/桶) (150 磅/箱) (100 磅/箱)

2000#Sack 2000#Sack ---- ----

(2000 磅/袋) (2000 磅/袋) ---- ----

Manufacturing Location

產地

Williamsport, Pennsylvania, U.S.A.

The seller makes mo warranty, expressed or implied, concerningthe accuracy of any results to be obtained from the use of this information and

no warranty is expressed or implied concerning the use of theseproducts other than indicated within. The buyer assumes all risks of use and/or

handling. No statement is intended or should be construed as arecommendation to infringe any patent.

Lonza Inc Tel 201 794 2400

17-17 Route 208 Fax 201 794 2597

Fair Lawn, NJ 07410, USA www.lonzagroup.com

胡先生02082551721