牌號：

巴陵岳化

廠商/產地：

湖南岳陽

用途級別：

注塑

尼龍—6切片

特征：尼龍—6切片生產采用兩端聚合,連續萃取,聯系干燥和DCS集散系統控制,產品為無色透明,無機械雜志,粒度均勻的圓柱形顆粒。切片規格（直徑×長）為2.0—2.5×2.0—2.5。

用途：尼龍—6切片粘度在2.4—3.6之間,可滿足高速紡和拉膜生產要求,廣泛用于民用絲,工業絲,尼龍6薄膜以及高度度工程塑料的生產。

Nylon 6 Chip

The nylon 6 chip plant of Baling Petrochemical is one of the largest plants in China The output or Eagle King nylon 6 chip is 42 kt annually. The primary technology and equipments of polymerization unit was imported from Germany. The main production technologies include two-state polymerization, continuous extraction, continuous drying and DCS distributed control system, which reaches the advanced international level.

Characteristics:

Nylon 6 chip is colorless transparent column-shaped particles with unitform particle size and no mechanical impurities. The specification of the chip is 2.0-2.5×2.0-2.5(diameter×length)

Application:

Nylon 6 chip has the viscosity of 2.4-3.6, satiosfying the requirement of high-speed spinning and drawing film. It can be widely used in the filed of civit yarn, industrial yarn, nylon 6 film and high-strength engineering plastics.

包裝：

用內襯鋁箔的聚丙烯編織袋或內襯鋁箔的牛皮紙包裝袋沖氮?dú)獍b,每袋凈重25kg。

尼龍—6切片技術規格（企業標準 Q/SH3185 021-2005）

Technical specification of nyion 6 chip(enterprise standard Q/SH3185 021-2005)

執行標準：Q/SH3185 021—2005

項目Item指標實驗方法Qualified優等品Superior一等品First grade合格品Qualified相對粘度Relative visicosityM±0.05M±0.10M±0.15PV07099.4可萃取物含量,%（質量分?jǐn)?shù)） ≤Extractabie matter % ≤0.60.81.0PV07093.2干燥后的殘余水分,%（質量分?jǐn)?shù)） ≤Water remains after dry ≤0.060.080.10PV09012.2深色雜質（黃黑粒子）,粒/100gDark impurity(yellow and black particte).Number/100g無(No)1＞1稱重法

注：相對粘度在2.4~3.6范圍內可調,M為相對粘度中值,具體數值可由供需雙方商定。

Note：The relative viscosity can be adjusted from 2.4 3.6 M the medium of relative viscosity can be determined by both sides of suppliers and buyers.

①M(fèi)為相對粘度中值,具體數據可由供需雙方商定。需方?jīng)]有要求是,按照M=3.45或M=3.35控制。

②可實現相對粘度在2.4—3.6范圍內可調。

③外觀質量指標—深色雜質（黃黑粒子）為判斷指標。

④外觀質量指標—連刀并條率要求應低于10%,該項作為生產過程控制指標,不作為判等指標。

⑤上述質量指標為常規檢驗指標,特殊質量指標由供需需雙方商定。

儲運：

儲于干燥庫房,遠離火源,儲存和運輸過程中嚴禁混放易燃,易揮發的農業生產體系溶劑。